Description
The Union 3.3 stick mod is a continuation of the Unions series line of mods using the updated domestic Starplat 2.0 controller board from Starplat.
Two fire buttons located on the top and front make it possible to use the mod in any position convenient for you.
The gold-plated positive contact provides better current conductivity and oxidation resistance.
As before, a wide choice of exterior design with a reliable coating.
The updated design, small dimensions, and other design features, as well as the use of a new controller, put it on a qualitatively new level.
The "SBS" type design allows you to reduce the dimensions and protect the structure from mechanical damage as much as possible. High-quality spring-loaded stainless steel connector. The base is made of heat-resistant plastic, which avoids deformation from heating. The outer casing is made of high-quality plastic and is coated with a protective varnish of special strength and wear resistance. The casings are available in different versions, both in plain black and with a variety of textures in matte and glossy versions. Due to the presence of a charge module with a USB 3.1 Type C connector, it is possible to charge the battery without removing it from the product.
The control board used with thermal control has a wide range of settings and makes it possible to set individual parameters.
The use of high-quality components guarantees long and trouble-free operation.
Video:
Specification
| Chipset parameters | |
|---|---|
| Board | Starplat 2.0 |
| Output wattage (W) | 0 - 75 |
| Output voltage (V) | 0-9 |
| Input voltage (V) | 3.2-4.2 |
| Atomizer resistance (Ohm) | 0.1 - 5.0 |
| Control | Gravity sensor (2 directions) |
| Screen Size (In) | 0.66 OLED |
| Interface language | English, italian, spanish, french, russian |
| Ability to update software | Yes |
| Temperature control | Yes |
| Saving settings | Yes |
| Case parameters | |
| Material | High quality plastic material |
| Distinctive features | Fast battery change system, spring loaded pin connector, gold-plated positive contacs, copper wires, engraving with serial number, atomizer diameter up to 24 mm |
| Battery | single 20700,21700 or 18650 with adapter |
| Charging port | USB 3.1 Type-C 1Max |
| Charger current consumption | 300 mA |
| Other parameters | |
| Warranty (months) | 6 |
| Dimensions (mm) | 49x29x81 |
| Weight (g) | 61 |